Program Director, Program Manager, Project lead, Systems, Avionics, Electrical, Integration, Design engineer.

Over 20 years of experience in avionics, electrical, design, systems, subsystems, integration, systems certification, verification, validation and Integration between customers, vendors and engineering. Systems design of airborne electronics (AE), avionics, electrical installations, modification, integration, documentation, certification, test, retrofitting, and changeovers. Fuel systems bleed air systems, cabin pressure systems, pneudraulic. Design, installation and modification of aircraft flight manual supplements (AFMS), Auxiliary power unit (APU), Bill of materials (BOM'S), Cordless cabin telephone system (CCTS), Electrical load analysis (ELA), Engineering orders (EO), Enhanced ground proximity Warning system (EGPWS) Hook-up lists (HUL), Instructions for continued airworthiness (ICA), Maintenance manual (MM), Parts list (PL), Reduced vertical separation minimum (RVSM), Satellite communications (SatCom), Service bulletins (SB), Supplemental type certificate (STC), Type Certificate (TC), Wiring Diagram Manuals (WDM), Wiring and/or Cable Harness fabrication of drawings/diagrams and PL (WHD/PL). Some experience with Preliminary system safety assessment (PSSA), Systems safety assessments (SSA), Failure mode effects and analysis (FMEA), Functional hazard analysis (FHA), Common mode analysis (CMA), Fault tree analysis (FTA).

Environmental Engineer