(P) * Designed automated FEMA, diagnostic and durability tests for brushless automotive cooling pumps. * Coding in VB / VC++ 2008 LabVIEW. * Use of ProE CAD tools . * Fully capable of interfacing with NI IO devices PCI, PICe and USB and environmental chambers. * Custom hardware design at board level, digital and analog. 586-383-8026 wolfmos@gmail.com Scott Wolf * Surface-mount and through-hole soldering rework. * 90% PCB work .2 mm to 2.54 mm pitch. * Filled in for machinist and fabricators. Experienced with microcontroller FPGA devices and well versed in troubleshooting and repair. * Wrote software for controllers used in sensors and interfaces for chassis safety systems integrated on CAN J1939 data bus. * Experience in both switcher and linear DC power sources. * Designed test procedure for conceptual systems using MS word/Excel and Visio, based on DOT, Eaton Eng, NIST, and the University of Michigan requirements. * Worked with NIST for verification of system accuracy. * Manually fabricated one off or short run hardware interfaces. * Developed calibration guides and test plans for software, hardware for the related system packages. 38340 Yonkers Dr. Sterling Heights, MI 48310 (P) 586-383-8026 wolfmos@gmail.com Scott Wolf * Responsible for LAN communications with multiple node coordination using 10/100/1gbs and 802.11. * Engineered custom mechanical assemblies for current projects related to new systems. * Field modifications to PCB's using manual soldering equipment. * Produced electronic drawings and specifications for all projects. * Assisted technicians and engineers with unrelated systems. * Developed software using Visual Studio. * Setup, installed and used embedded controls running XPC on PC104. * Analyzed several serial data bus's used in integration. (P) * Designed, built and maintained proprietary laboratory instruments for use in RADAR systems. * Developed electronic control systems used for evaluation and implemented on radar systems for the Department of Transportation. * Experienced in the use of oscilloscopes and related electronic instruments. Experienced with microcontroller FPGA devices and well versed in troubleshooting and repair. * Wrote software for controllers used in sensors and interfaces for chassis safety systems integrated on CAN J1939 data bus. * Experience in both switcher and linear DC power sources. * Designed test procedure for conceptual systems using MS word/Excel and Visio, based on DOT, Eaton Eng, NIST, and the University of Michigan requirements. * Worked with NIST for verification of system accuracy. * Manually fabricated one off or short run hardware interfaces. * Developed calibration guides and test plans for software, hardware for the related system packages. 586-383-8026 wolfmos@gmail.com Scott Wolf Responsible for LAN communications with multiple node coordination using 10/100/1gbs and 802.11. * Engineered custom mechanical assemblies for current projects related to new systems. * Field modifications to PCB's using manual soldering equipment. * Produced electronic drawings and specifications for all projects. * Assisted technicians and engineers with unrelated systems. * Developed software using Visual Studio. Setup installed and used embedded controls running XPC on PC104. * Analyzed several serial data bus's used in integration. (P) * Utilized Oscilloscope, generators and modern analyzers. * Performed analysis on digital and analog electronic designs for the automotive industry. * Repaired and calibrated laboratory instruments scopes, ARB's, DMM and computerized IO. * Identified malfunctions diagnosed causes and resolved design errors. * Engineered circuit designs and assisted in the planning and execution of design corrections. * Engineered custom circuitry for emulation and design verification of VW body control modules. * Develop current limiting force control safety procedures for window regulator control, AKA: Door Modules and powered Sun / Sky roof. * Constructed prototype circuit boards from conceptual schematics. * Worked with production on reflow and wave soldering processes. * Wrote C and Visual Basic control software. * Used National Instruments and LabVIEW for automated analysis. * Wrote reports, researched electronic components, built test fixtures, soldered and modified electronic equipment. * PC trouble-shooting, PC repair and integrating PC data acquisition. 586-383-8026 wolfmos@gmail.com Scott Wolf

Highlights:

• Altium
• Intrepid
• CAN
• Ultiboard
• Microcontroller
• PCB
• Automotive
• Electronics
• Troubleshooting
• Soldering
• Multisim
• J1939
• RF
• Semiconductor
• lon
• radionics