Honeywell Aerospace (Formerly Ems Technologies) Work Values

Daily Duties at Honeywell Aerospace (Formerly Ems Technologies):

Hardware Verification for the A781-200 SDU/SCM development. Development and maintenance of documentation associated verification activities including plans, procedures and reports. Interpretation of requirements and their implementation. Scheduling internal and external test equipments, facilities and test activities within the overall project schedule. Informal and formal verification test execution and reporting activities. Updated all certification reports, templates for Inmarsat Aero Classic and SBB services testing. Review and Update all the test data from the test conductor and update all applicable test reports accordingly. Promotion of all test reports for the final approval to submit all test reports for Inmarsat Type Approvals. Updated the Certification Document Tree with all test reports information/details. Pre-compliance FCC part 87 testing to mitigate any risk for final compliance/approval. Hardware Verification for the A350 SDU/SCM development. Development and maintenance of documentation associated verification activities including plans, procedures and reports. Interpretation of requirements and their implementation. Scheduling internal and external test equipments, facilities and test activities within the overall project schedule. Pre-compliance high voltage testing to mitigate any risk for final compliance/approval.  Reviewed Hardware Requirement Specifications of A350 Satellite Data Unit with different verification methods like Analysis, Demonstration, Inspection, Simulation and Test (HW/SW/Qualification) using BOM, System Block Diagram, Family Tree, System Interconnection Diagram, Outline & Interconnect drawing, Schematic Diagrams of sub assemblies (CC, CP, DP, VP, RP, PSU, HPA, DLNA, Antenna, etc.), Test Specifications of sub assemblies, FAI reports, Test data sheets, Test plans, Test procedures, HVCP, SVCP, Test reports, Inmarsat Aero Classic, S64 & BGAN standards, MTRs, RTCA/DO-160 & 210 standards, FCC part 87 standard, ETSI EN 301 473 standard, Facilities Qualification test reports. Reliability analysis report, Flammability analysis test report, guided pertinent people for corrective actions, generated NCRs to address pending compliance work and completed HVR test report.  Reviewed Hardware Requirement Specifications of A781-200 SDU & SCM with different verification methods like Analysis, Demonstration, Inspection, Simulation and Test (HW/SW/Qualification) using BOM, System Block Diagram, Family Tree, System Interconnection Diagram, Outline & Interconnect drawing, Schematic Diagrams of sub assemblies (CC, CP, DP, VP, RP, PSU, HPA, DLNA, Antenna, etc.), Test Specifications of sub assemblies, FAI reports, Test data sheets, Test plans, Test procedures, HVCP, SVCP, Test reports, Inmarsat Aero Classic, S64 & BGAN standards, MTRs, RTCA/DO-160 & 210 standards, FCC part 87 standard, ETSI EN 301 473 standard, Facilities Qualification test reports. Reliability analysis report, Flammability analysis test report, guided pertinent people for corrective actions, generated NCRs to address pending compliance work and completed HVR test report.  Performed successful High Voltage Testing for A350 SDU back panel to address one of the HRSs.  Preparation and Approval of Inmarsat Aero classic test procedures & reports like TX signal spectrum, RX sensitivity & Dynamic range, TX Power, RX rejection of interference signals, Transmit Inhibit, Inmarsat circuit mode service, Receiver Damage level and Transmit Load VSWR for A781-200 SDU Inmarsat Classic/RTCA Type Approvals.  Preparation and Approval of Inmarsat SBB test procedures & reports like TX Phase Noise, TX Power Spectral Density, EIRP Determination & Stability, QPSK/QAM PER, Spurious & Harmonics, Modulator Performance, TX Burst characteristics, TX Burst Timing Accuracy and Stability and TX Off level for A781-200 SDU Inmarsat SBB Type Approval.  Performed successful FCC part 87 RF conducted emission pre-compliance testing of A781-200 to gain FCC approval certification.

What they like about Honeywell Aerospace (Formerly Ems Technologies):

Organizations with strong, centralized leadership are particularly attractive to you. You require a work environment with leadership that aggressively seeks to expand and grow the business and does so in a visible and decisive manner. In general you prefer to work in an environment in which there is a strong link between leadership, its actions, and a strong set of company-wide values.

Tags

Inmarsat Aero Classic, Inmarsat SBB service, MTR, RTCA/DO-160, RTCA/DO-210, RTCA/DO-254, HVR, HRS, IBM DOORS, PTC Windchill, Visibility ERP, Type Approval, Test Plan, Procedure, Report, Review, Family Tree, Certification Doc Tree, Facily Environmental report, Facility EMC report, Spurious, Harmonics, QAM, QPSK, PER, EIRP, Spectrum Mask, IMD, Modulator Performance, Receiver sensitivity, linearity, Damage level, TX signal spectrum, Power amplifier, AFDX, ARINC 429, ARINC 600, Nominated bandwidth, ETSI 301 473, FCC part 87, Frequency stability/accuracy, Step size, Burst, Doppler, SDM, GDU, BPLT, Conformity, Calibration, Compliance, Analysis, Simulation, Demonstration, Inspection, Test - Hardware/Software/Qualification, SRS, Hardware Verification Requirement, Hardware Requirement Specifications, Flammability, Reliability, MIL-HDBK-217, QPL, IPC 610A, Standards, IPS, MPDS, L band, Dynamic Range, Load VSWR, Return loss, Source Signal Analyzer, Noise Figure, C/N0, Spectrum Analyzer, ACARS simulator, A-BPSK, Satellite communications, Aerospace, Avionics, ICAO, EMC, EMI, Safety, CISPR22, CISPR24, Electromagnetic Compatibility, Immunity, UL 60950, IEC 60950, CB, CE, ETL, SEMKO, NEMKO, CSA 60950, FCC part 15, FCC part 22, FCC part 24, FCC part 90, ITE, MDD, RSS 210, RSS 131, FCC part 101, Microwave, Wireless, RF, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-11, ESD, Surge, Voltage Dips, Burst/Fast Transients, RF Power meter, Radiated, Conducted, EN, RoHS, REACH, Global approvals, North America, South America, Europe, Asia, Australia, New Zealand, Japan, China, India, Russia, Telecom, FCC part 68, ICES 003, CDMA, TDMA, FDMA, LTE, 3GPP, Directional Coupler, Horn Antenna, Word, Excel, Visio, Power Point, RFspectra, Altium Designer, Hspice, VHDL, Verilog, C, Synthesis, FPGA, ASIC., Adobe Acrobat Professional, Frame maker, Oracle, Modelsim, ADS, stub, LNA, Mixer, VCO, PA, 1 dB compression, Gain, MOSFET, AES, Intermodulation, Matlab, emissions, ETSI, IEC 60065, embedded ITE, diplexer, biconical, log periodic, wr-26, wr-42, BER, bit error rate, MIL-STD-461, ANSI C63, MCDU, FMS, MIL-STD-1629A, IRS, DO-178B, FMEA, MIL-STD-1553

Skills

P&L responsibilities, Presentation, Ecommerce Strategy and digital marketing channels optimization - SEO, SEM, email, affiliates - for high-profile accounts., Technology Solutions, Sales Support, Software Implementation, Requirements Analysis & Specification, Leadership , Usage of new design tools like RFIC design, FPGA/ASIC design, etc., A strong technical background and analytical knowledge of EMC test and high speed design principles., Expert knowledge of international standards (e.g. FCC, CISPR, ANSI, IEC, NEBS, ICAO, Inmarsat Classic/SBB, RTCA DO-160/210/254, TIA/EIA 571-A, etc.) and procedures related to obtain product certifications., Intentional Radiator requirements including FCC Part 15.247 and IC RSS 210, Very good experience to deal with Nationally Recognized Test Labs (NRTLs), including UL, CE, CSA, ETL, PSE, CCC, TUV, Nemko, NOM, etc. for safety certifications, Familiarity with MIL-STD-1553 for serial data bus electrical/mechanical/functional characteristics, MIL-STD-1629A for FMEA, MIL-STD-461F for EMC, MIL-HDBK-217F for reliability prediction of electronic equipments., IBM Rational DOORS V9.3, PTC Windchill V10, Visibility ERP solution, MS office suite – Word, Excel, Power Point, Visio, Adobe Acrobat Pro, Frame maker, HyperLinx, Mentor Graphics Modelsim, SpectreRF , Excellent understanding of product delivery life-cycles in a dynamic fast paced environment., Expert negotiator with external accredited test laboratories, approval authorities and test equipment and component suppliers., Very successful in managing people during projects' approvals, installation and commissioning., Very strong verbal and written communication skills to expedite product approvals.

These are some of the questions we asked our climbers about their experiences with Honeywell Aerospace (Formerly Ems Technologies):